 |
||
|
Clips Calculation
: To be views in conjunction with enginerring certification
Cladding Panels in
Horizontal Position Cladding Panels in Horizontal Position
Notes:
1. Shelf Angles to be used in conjunction with StoneClips when the wall being clad exceeds 3,000mm in height.
See section
for sizes of angles. 2. Suggested fixings for:
TIMBER – 14 gauge pan head screws x 20mm STEEL SHEETING – 12 gauge x 20mm – Wafer, Bungle, Button or Teks screws suitable for this material
CONCRETE or
BRICK – For 6mm range &38mm x 6.5mm zinc alloy drive pins . For 8,10 x 12mm range. 50mm x 6.5mm screw bolts
Cladding Panels in Vertical Position
Key:
SB = Load Bearing Shelf Angle StoneClip EXT10 = StoneClip H/D8 = 8mm StoneClip
|
||
